Author: Asaka, T.
Paper Title Page
THPO091 90 kW Solid-state RF Amplifier with a TE011-mode Cavity Power-combiner at 476 MHz 889
THOP07   use link to see paper's listing under its alternate paper code  
 
  • Y. Otake, T. Asaka, T. Inagaki
    RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
  • S. Aizawa, K. Nagatsuka, T. Okuyama, K. Sato, H. Yamada
    Nihon Koshuha Co. Ltd, Yokohama, Japan
 
  Solid-state RF amplifiers, which have long lifetimes and small failures, are the recent trend of reliable and stable high-power rf sources for particle accelerators. Hence, we designed a 90kW solid-state amplifier with an extreme low-loss TE011 mode cavity (Q0=100, 000) power-combiner operated at 476 MHz and a 6 us pulse width. Developing this amplifier is for replacement of an IOT rf amplifier, at the X-ray free-electron laser, SACLA. In SACLA, highly RF phase and amplitude stabilities of less than 0.02 deg. and 10-4 in rms are necessary to stable lasing within a 10 % intensity fluctuation. The amplifier comprises a drive amplifier, a reentrant cavity rf power divider, 100 final amplifiers with a 1 kW output each and a TE011 mode cavity combiner. Water-cooling within 10 mK and a DC power supply with a noise of less than -100 dBV at 10 Hz for the amplifier is necessary to realize the previously mentioned stabilities. Based on the test results of the amplifier, the above-mentioned specifications with the extreme low-loss are promising. The amplifier also allows us to operate in pulsed and CW rfs for linacs and ring accelerators. We report the performance of the 90kW amplifier.  
slides icon Slides THPO091 [1.750 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO091  
About • paper received ※ 06 September 2018      issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPO124 Design of Pulsed HV and RF Combined Gun System Using Gridded Thermionic-Cathode 949
 
  • T. Asaka, H. Tanaka
    RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
  • Y. Otake
    JASRI, Hyogo, Japan
  • T. Taniuchi
    JASRI/SPring-8, Hyogo-ken, Japan
 
  In recent state-of -arts accelerators like an X-ray free electron laser, the electron beam performance of a linear accelerator demands a low emittance of ~ 2mm mrad. To obtain the low-emittance, such a 500kV thermionic-gun at SACLA and a photocathode rf gun generating 0.5~1MeV electron beams had been developed. Although the photocathode rf gun is compact, it is necessary to prepare a highly stabilized, large and complicated laser system. The 500-kV thermionic-gun of SACLA injector has also to prepare a technically difficult and large high voltage system. Hence, we propose a low-emittance gun system with a low-voltage and grid-loaded 50kV thermionic gun and a 238MHz rf cavity to overcome the complicated difficulty, as extension of the established technology. This system quickly accelerates the electron up to 500keV to preserve the low emittance and to cancel a grid focusing effect by the space charge force of the beam. By using a particle tracking code, we obtained the optimum voltage parameters of the grid and the 238MHz rf for obtaining the above-mentioned low emittance. In this paper, we present a numerical feasibility study to realize the low-emittance gun system.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO124  
About • paper received ※ 10 September 2018      issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)