Author: Kostin, D.
Paper Title Page
MOPO037 SRF Gun Development at DESY 105
MOOP07   use link to see paper's listing under its alternate paper code  
 
  • E. Vogel, S. Barbanotti, I. Hartl, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, M. Schmökel, J.K. Sekutowicz, S. Sievers, N. Steinhau-Kühl, A.A. Sulimov, J.H. Thie, H. Weise, L. Winkelmann, B. van der Horst
    DESY, Hamburg, Germany
  • J.A. Lorkiewicz, R. Nietubyć
    NCBJ, Świerk/Otwock, Poland
  • J. Smedley
    BNL, Upton, Long Island, New York, USA
  • J. Teichert
    HZDR, Dresden, Germany
  • M. Wiencek
    IFJ-PAN, Kraków, Poland
 
  A future upgrade of the European XFEL (E-XFEL) foresees an additional cw operation mode increasing the flexibility in the photon beam time structure. This mode requires among others a cw operating photo injector. We believe that using an SRF gun is the preferred approach as the beam parameters of normal conducting pulsed guns can be potentially met by SRF guns operating cw. Since more than a decade DESY in collaboration with TJNAF, NCBJ, BNL, HZB and HZDR performs R&D to develop an all superconducting RF gun with a lead cathode. In the frame of E-XFEL cw upgrade feasibility studies, the SRF-gun R&D program gained more attention and support. Within the next few years we would like to demonstrate the performance of the all superconducting injector required for the E-XFEL upgrade. The selected approach offers advantages w.r.t. the cleanliness of the superconducting surface, but requires a complete disassembly of a cryostat and stripping the gun cavity in a clean room to exchange the cathode. Thus it is practical only when the life time of the cathode is at least several months. In this paper we present the actual status of the R&D program, next steps and the longer term plans.  
slides icon Slides MOPO037 [1.966 MB]  
poster icon Poster MOPO037 [3.774 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO037  
About • paper received ※ 11 September 2018      issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPO038 RF Operation Experience at the European XFEL 109
MOOP09   use link to see paper's listing under its alternate paper code  
 
  • J. Branlard, V. Ayvazyan, Ł. Butkowski, M.K. Grecki, M. Hierholzer, M.G. Hoffmann, M. Hoffmann, M. Killenberg, D. Kostin, T. Lamb, L. Lilje, U. Mavrič, M. Omet, S. Pfeiffer, R. Rybaniec, H. Schlarb, Ch. Schmidt, N. Shehzad, V. Vogel, N. Walker
    DESY, Hamburg, Germany
 
  After its successful commissioning which took place during the first half of 2017, the European X-ray free electron laser is in now in regular operation delivering photons to users since September 2017. This paper presents an overview on the experience gathered during the first couple of years of operation. In particular, the focus is set on RF operation, maintenance activities, availability and typical failures. A first look on machine performance in terms of RF and beam stability, energy reach, radiation related investigations and microphonics studies will also be presented.  
slides icon Slides MOPO038 [2.421 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO038  
About • paper received ※ 11 September 2018      issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPO029 Highlights of the XM-3 Cryomodule Tests at DESY 388
 
  • J. Branlard, V. Ayvazyan, A. Bellandi, J. Eschke, C. Gumus, D. Kostin, K.P. Przygoda, H. Schlarb, J.K. Sekutowicz
    DESY, Hamburg, Germany
  • W. Cichalewski
    TUL-DMCS, Łódź, Poland
 
  To investigate the feasibility of the continuous wave (cw) upgrade of the European XFEL (E-XFEL) DESY, on-going tests are performed on E-XFEL prototype and production cryomodules since 2011. For these studies, DESY’s Cryo-Module Test Bench (CMTB) has been equipped with a 105 kW cw operating IOT in addition to the 10MW pulsed klystron, making CMTB a very flexible test stand, enabling both cw and pulse operation. For these tests, E-XFEL-like LLRF electronics is used to stabilize amplitude and phase of the voltage Vector Sum (VS) of all 8 cavities of the cryomodule under test. The cryomodule most often tested is the pre-series XM-3, unique since it is housing one fine grain niobium and seven large grain niobium cavities. In autumn 2017, additional spacers were installed on all 8 input couplers to increase the maximum reachable loaded quality factor Ql beyond 2·107. With higher Ql, up to 6·107 for 6 cavities and 2.7·107 for 2 cavities, we have investigated the VS stability and SRF-performance of this cryomodule under various conditions of cooling down rate and operation temperature 1.65K, 1.8K and 2K, at gradients up to ca. 18MV/m. The results of these tests are presented in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO029  
About • paper received ※ 11 September 2018      issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)