Author: Pei, S.
Paper Title Page
THPO102 Design Studies of Output Window for CEPC Klystron 911
 
  • Z.J. Lu, Y.L. Chi, S. Fukuda, G. Pei, S. Pei, S.C. Wang, O. Xiao, U. N. Zaib, Z.S. Zhou
    IHEP, Beijing, People’s Republic of China
  • S. Fukuda
    KEK, Ibaraki, Japan
 
  A high power and high efficiency klystron of the 650MHz, 800kW CW klystron for the Circular Electron Positron Collider (CEPC) is designed and developed at IHEP. This paper presents the design and simulation for the high power coaxial window for it. Plan of the hot test (high power testing before installing to the klystron) are also described. Simulation software of CST, ANSYS and Multipac 2.1 are used for design of window microwave structure, thermal analysis and multipacting effects. We obtained the good simulation results successively; the coaxial window S-parameter analysis, has revealed a low reflection at the operating frequency of 650 MHz. The thermal simulation shows a good temperature distribution under the cw 800kW propagation; maximum temperature has been found to be 33 °C at ceramic with water cooling in the inner and outer conductor. The multipacting at the window is possible source of the failure and it is shown that multipacting has less chance to be happened on the surface of ceramic.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO102  
About • paper received ※ 12 September 2018      issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPO113 Design of 4 Ampere S-Band Linac Using Slotted Iris Structure for Hom Damping 934
 
  • J. Pang, S. Chen, X. He
    CAEP/IFP, Mainyang, Sichuan, People’s Republic of China
  • S. Pei, H. Shi, J.R. Zhang
    IHEP, Beijing, People’s Republic of China
 
  An S-band LINAC with the operating frequency of 2856 MHz and beam current of 4 A was designed for flash X-ray radiography for hydrodynamic test. The optimization of the parameters of the LINAC was processed to obtain the minimum beam radius and the maximum energy efficiency. For the purpose of reducing the beam orbits offset at the exit of LINAC, a slotted iris accelerating structure would be employed to suppress the transverse Higher Order Modes (HOMs) by cutting four radial slots in the iris to couple the HOMs to SiC loads. In this paper, we present the design of the LINAC and the results of beam dynamic analysis.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO113  
About • paper received ※ 10 September 2018      issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)