Author: Tajiri, Y.
Paper Title Page
FR1A06 Pulse-by-Pulse Beam Parameter Switching of High-Quality Beams for Multi-Beamline Operation at SACLA 988
 
  • H. Maesaka, T. Fukui, T. Hara, Y. Otake
    RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
  • T. Hasegawa, O. Morimoto, Y. Tajiri, S. Tanaka, M. Yoshioka
    SES, Hyogo-pref., Japan
  • N. Hosoda, S. Matsubara, T. Ohshima
    JASRI/SPring-8, Hyogo-ken, Japan
  • C. Kondo, M. Yamaga
    JASRI, Hyogo, Japan
 
  The main linac of the X-ray free electron laser (XFEL), SACLA, provides electron beams to two XFEL beamlines and a beam transport line to the SPring-8 storage ring. In order to utilize these beamlines at the same time, a kicker magnet was installed into the switch yard and electron beams with a 60 Hz repetition rate can be distributed to these beamlines pulse-by-pulse. Since a beam energy and an optimum bunch length are usually different for each beamline, the operation condition of each acceleration unit, such as the rf phase, the trigger permission, etc., has to be changed pulse-by-pulse. Even in that case, the electron beam quality, such as 1 mm mrad normalized emittance, 10 fs bunch length, 10 kA peak current, etc., must not be deteriorated. At first, we developed a parameter control software that was able to manage two XFEL beamlines with an equal repetition rate. Different energy beams with sufficient quality for lasing were successfully distributed to the two XFEL beamlines and the XFEL performances of both beamlines were optimized simultaneously. The development status of a new parameter switching system with an arbitrary sequence of the destinations will also be reported.  
slides icon Slides FR1A06 [6.179 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-FR1A06  
About • paper received ※ 16 September 2018      issue date ※ 18 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)